Crytec ATV150 Flail Mower 15Hp Power Mower
SKU: crytec-atv150-flail-mower-15hp-power-mower
£1,735.65£3,214.65Save 46%
- ✓ Free shipping on all orders
- ✓ 30-day return and refund guarantee
- ✓ Premium quality "” built to last
- ✓ Secure checkout with Visa and MasterCard
Guaranteed Safe Checkout
VisaMastercardAmexApple PayGoogle Pay
Description
The Crytec ATV flail mower is built to tackle a multitude of tasks, used in paddock maintenance for controlling and reducing weeds in the paddocks, cutting down docks, nettles, thistles and bracken, encouraging grass growth. It is also a great mower for cutting down overgrown brambles in woodland areas and for fire break mowing, where heather and saplings need to be cut down. The flail mower is set up on hammer / Y flail blades.
1500mm cutting width
- Y Flail type Blades x 28
- Heavy Duty Construction
- Belt driven
- Height Adjustable 50mm – 150mm
- Swivel Hitch
- Tyres – 16 x 7.5 x 8”
- Hammer flail type blades x 28 Flails. (4 curved banks x 7 blades each.)
- For cutting thick grass
- Loncin 4 stroke petrol engine – 420cc,
- Recoil start
- Max rpm 3600
- specialist workshop available
- Part assembled approx 50 mins then ready to use just add oil and fuel.
- Full UK service and parts operation to maintain your chipper for years to come.
Crytec has all parts required for maintenance on this model Mower
As for the engine, please fill on level ground until oil overflows as Loncin engines have a very sensitive oil sensor. Checks must be done all round prior to use, Any help required please contact our workshop.
The Mower is delivered on a steel framed Pallet 90% assembled . You should allow approx. 30 to 50 min for final assembly .The manual for the mower will that come with your mower.
You will need approx. 1 litre of engine oil for the engine. For this purpose we recommend multi-grade oil of classification 10W40 or 15W40, Please make sure you grease your new mower prior to use, then after each time you use the mower. Please watch mowing speed otherwise you will burn belts, this is a common problem for new users.
Please note the mower comes in a steel frame, you will need a small grinder to cut the 2 centre bars and top bar out, this will allow you to free the mower and pull out on its wheels once off the wooden pallet that we put under the steel frame has been removed.
